|
Supagraf® Control - for control valves
Longterm sealing plus fugitive emission control - High integrity gland sealing for control valves.
- Reduces fugitive emissions to below 50ppm to help industry meet EU IPPC Directive.
- Longterm adjustment-free operation - over 100,000 valve strokes.
- Low friction graphite for accurate valve action.
- Maximum system pressure: 250bar.
|
|
Supagraf® Premier - for valves
World-beating fugitive emission control - Independently certified to TA-Luft requirements.
- Fugitive emission control to well below 100ppm.
- Top of its class in independent tests run on behalf of CAPI Group (Akzo Nobel, Shell, Dow and DSM).
- Low friction on rotary and rising stem valves.
- Maximum system pressure: 250bar.
|
|
Walkersele® Ultraglide
Ultraglide reformulated-HNBR elastomer - For high speeds in abrasive environments.
- Highly extended sealing life with many fluid media.
- Low friction material for improved running.
- Improved heat dissipation for high efficiency sealing.
|
|
Aquagraf - for rotary duties
Potable water and chemical duties - Graphite-lubricated PTFE on a silicone rubber core.
- Hard wearing, resilient, low friction packing.
- WRAS approved for potable water duties.
- Maximum shaft speed: 20m/s.
- Also recommended for valves.
|
|
Fluograf® - for rotary duties
An outstanding pump packing - Highly versatile packing of 100% Gore GFO® yarn.
- Extended service life - by up to 400% in harsh environments.
- Approved for potable water and food processing.
- Maximum shaft speed: 22m/s.
- Also suitable for valves and reciprocating pumps.
|
|
Fluolion® Emulsion XA-P - for rotary duties
High performance packing for chemical duties - Universal packing of a unique synthetic yarn, cross-plaited over an elastomeric core.
- Excellent choice for hot, abrasive, caustic media.
- Maximum shaft speed: 20m/s.
- Also suitable for valves and reciprocating pumps.
|
|
Hornet - for rotary duties
Long life with off-centre shafts and abrasive media - Aramid at corners, PTFE/graphite in body, over an elastomeric core.
- Absorbs eccentric action of worn shafts/bearings.
- Approved for potable water and food processing.
- Maximum shaft speed: 20m/s.
- Also suitable for valves and reciprocating pumps.
|
|
Supagraf® LF Rings - for valves
Low friction plus fugitive emission control - Moulded rings of expanded graphite to which a special low-friction coating is sinter bonded.
- Fugitive emission control to 50ppm or lower.
- Retains low-friction with emission control for 60,000+ valve cycles.
- Maximum service pressure: 250bar.
|
|
Supagraf® RibbonPak SC - rotary duties
Superior gland packing for rotary pumps & equipment - All carbon construction - low friction, high thermal conductivity
- Excellent chemical resistance across wide temperature range
- Maximum shaft speed 20m/s
- Maximum system pressure 25bar
|
|
Supagraf® Moulded Rings - for rotary duties
High speeds and very high temperatures - Graphite foil preformed into endless or split rings.
- Approved for potable water and food processing.
- Highest purity Nuclear Grade also available.
- Outstanding temperature and chemical capabilities.
- Maximum shaft speed: 25m/s.
- Also recommended for valve stem duties.
|
|
Lionsele® G - for rods & glands
High performance single-acting seal - Compact seal with very smooth operation.
- Low dynamic and breakout friction.
- Maximum operating pressure: 400bar.
- Maximum surface speed: 5m/s.
|
|
Lionsele® P - for pistons
High performance double-acting seal - Compact seal with low levels of dynamic and breakout friction.
- Instant response to pressure plus low power consumption.
- Maximum operating pressure: 400bar.
- Maximum surface speed: 5m/s.
|
|
Lofilm® HD - for rams, rods & glands
Heavy duty for forging and extrusion presses - Very robust and well proven packing.
- Instant sealing response under all loads.
- High integrity sealing against worn surfaces.
- Split seals provided for major downtime savings.
- Maximum operating pressure: 620bar.
|
