|
|
|
Description
Supagraf® Control is an innovative compression packing that provides long-term, high integrity sealing for control valves.
This is a best available technique product for reducing industry's VOC fugitive emissions in line with the European Union's IPPC Directive.
It is manufactured in exfoliated graphite, reinforced in a novel way to provide additional strength and resistance to pressure and extrusion. An advanced lubricant system is incorporated to prevent the pick-up of graphite on valve stems.
Typical applications
Supagraf® Control is designed for emission control - to better than 50ppm leak tightness - on control valves in systems handling fluid media such as hydrocarbon liquid fuels and gases, lubricating oils and hazardous process chemicals.
It will replace PTFE V-type packings that can be readily damaged by ingress of dirt and other foreign particles to the gland area.
Specifications
Dresser Masoneilan control valves fitted with Supagraf® Control are certified to ISO 15848-1 Class B, CC3, at temperatures from -29°C to +425°C. The valves meet the stringent VOC emission control levels specified in ISO 15848, for 100,000 stem operating cycles.
Prime features
Test result summaries
Thermal cycling: 10,800 valve operating cycles at 20°C and 50bar, followed by 16,700 valve operating cycles at 280°C and 50bar. Recorded leakage <2.2x10-4 mbar.litre/second. (Third-party tested by major manufacturer of control valves.)
Fugitive emission control: Dresser Masoneilan control valves fitted with Supagraf® Control achieved helium leakage rates of less than 10-4mg.s-1.m-1 for 100,000 valve cycles for certification to ISO 15848-1 Class B, CC3. (Third-party tested by CETIM, Nantes, France).
Fugitive emission control: 10ppm to 15ppm maximum emission levels for five-ring set of Supagraf® Control after 1100 stem strokes and five thermal cycles between ambient and 160°C. (Tested by James Walker Technology Centre).
Long-term performance: Over 100,000 stem strokes with emission levels below 500ppm using 40bar methane, without gland adjustment. (Tested by James Walker Technology Centre).
Product evaluation tests: These have been undertaken by six leading manufacturers of control valves.
Chemical properties
Chemically inert within the range pH 1-14, excluding strong oxidising agents. It has low volatiles content.
Service capabilities - valve stem duties
Maximum operating temperature: +350°C with thermal cycling.
Minimum operating temperature: -200°C.
Maximum system pressure: 250bar.
How supplied
Split preformed rings and sets for ease of installation and optimal performance, or boxed in 8m lengths for on-site maintenance economy. Ex-stock: all popular square sections from 3mm upwards to suit all standard valves. Non-standard square or rectangular sections made to order. Full fitting instructions are included.
Click here to download Compression Packing Guide pdf (2.17MB)
