Product & Services

Cooling Systems

Cooling system pumps, valves and condensors, large and small, all need the long-life sealing products we manufacture and supply.

Condensers (CCGT; coal, gas, oil & waste-fired)

Door seals

  • Water-jet cut profiles in non-asbestos fibre jointings, Supagraf®, Nebar® cork-elastomer, or elastomeric sheet jointings.

Gaskets

  • Cut gaskets in Centurion®, Supagraf® Tanged T10, and EPDM jointing materials, plus Metaflex® spiral wound and other metallic gasket types.

Tube plugs & tube test seals

  • Long-life reusable plugs and tube test seals in polyurethane for duties up to 100MPa (14,500psi), or moulded elastomer-proofed fabric for duties up to 69MPa (10,000psi).

Valve stem packing

  • Compression packing in length form or preformed rings, and Supagraf® Moulded Rings.

Protector bellows

  • For valve actuators we recommend Comflex® protector bellows.

Tension control fasteners

  • We recommend our RotaBolt® range for all bolted joints on condensers.

Cooling water pumps (CCGT; coal, gas, oil & waste-fired)

Pump shaft packings

  • Length form packings and preformed packing sets.

Gaskets

  • Cut gaskets in Centurion® and Supagraf® Tanged T10, plus Metaflex® spiral wound and other metallic gasket types.

General valves on cooling system (CCGT; coal, gas, oil & waste-fired)

Gaskets

  • Cut gaskets in Centurion® and Supagraf® Tanged T10, plus Metaflex® spiral wound and other metallic gasket types.

Valve stem sealing

  • We recommend compression packing in length form and preformed sets.

General pumps on cooling system (CCGT; coal, gas, oil & waste-fired)

Gaskets

  • We recommend cut gaskets in Centurion® and Supagraf® Tanged T10, plus Metaflex® spiral wound and other metallic gasket types.

Pump shaft packings

  • Our Liongraf, Fluograf®, and Hornet compression packings are most widely used.

HP & LP feedwater heaters (CCGT; coal, gas, oil & waste-fired)

Gaskets

  • We supply cut gaskets in Centurion® and Supagraf® Tanged T10, plus Metaflex® spiral wound and other metallic gasket types.

Tension control fasteners

  • We recommend our RotaBolt® range for all bolted joints on feedwater heaters.

Pipework on cooling systems (CCGT; coal, gas, oil & waste-fired)

Gaskets

  • Cut gaskets in Centurion® and Supagraf® Tanged T10, plus Metaflex® spiral wound and other metallic gasket types.

Pipe supports

  • Tico® Pipe Grips and Tico® Clip Strip.

Tension control fasteners

  • We recommend our RotaBolt® range for all bolted flange joints on cooling system pipework.