You are currently viewing the James Walker Global website.
You are currently viewing the James Walker Global website.
Our customer was a third party design agency working for a global leader involved in fuel production through to decommissioning and containment. They were required to support the seal design on containers carrying radioactive waste for up to 40 years. The highly irradiated fluids being contained represented a significant performance challenge for the sealing materials due to the level and duration of exposure.
Heavily irradiated fluids and equipment with 40 year service life.
Originally an extruded hollow double-seal profile, although this represented a number of avoidable sealing challenges, which James Walker brought to the customer's attention.
After discussions with the customer, their design sub-contractor and knowledge gained from the end user, James Walker put forward a dual O-ring design solution. Each O-ring was approximately 1.6 m diameter x 10 mm cross section, supplied as a finished part, with both seals requiring individual tooling.
James Walker identified Shieldseal 663, a material well known to end users as the next generation EPDM material for nuclear applications. The selection was backed up by existing test reports from AMEC demonstrating the radiation resistance of this elastomer. James Walker designed a dual dovetail groove arrangement to house the seals and prevent them from dropping out of the housing once retained.
The customer has been able to demonstrate the integrity of the sealing solution through pressure testing. The end user has confidence in the overall solution in part due to the sealing products offered by James Walker, supported by third party reports, and our reputation in the industry.
In addition to offering seal design and manufacture, James Walker solved further challenges with flatness of the container caps, application of consistent bolt loads around the entire lid using RotaBolt load indicating technology, and the application of engineering thermoplastics for bolting and flange insulation sleeves and washers.
Want to discuss your project, engineering or materials challenge expert to expert? Simply provide us with your contact details and a little information about the application you are working on, and one of our experts will contact you as soon as possible.
