Gaskets and Sheet Jointings
Soft cork-elastomer jointing of closed-cell construction based on polychloroprene elastomer.
Previously designated Lioncelle® CS.
Recommended maximum system pressure is 0.2Mpa/2bar.
- Seals efficiently at low bolt loads and on uneven or delicate flanges.
- +100°C maximum operating temperature in liquids.
- Retains flexibility down to -30°C.
Complies with ASTM F104 P2357A.
Suitable for use with air (at low pressures), water, alcohols, fuel and diesel oils, mineral lubricating oils, mineral hydraulic fluids, water/glycol, ASTM Oil No 1, IRM903 oil, ASTM Fuel A, BS 148 Transformer Oil.
(Tested to ASTM F104 procedures)
Hardness, IRHD: 30 to 50 (ASTM D1415)
Tensile strength, MPa minimum: 0.53 (ASTM F152B)
Compressibility @ 0.7N/mm², %: 25 to 45 (ASTM F36F)
Recovery, minimum %: 75 (ASTM F36F)
Fluid resistance, % volume change in:
ASTM Oil No 1, 72h @ 100°C: -10 to +10 (ASTM F146)
IRM903l, 72h @ 100°C: +15 to +50 (ASTM F146)
ASTM Fuel A, 22h @ ambient: 0 to +25 (ASTM F146)
BS 148 Transformer Oil, 14 days @ 90°C: +15 (ASTM F146)
Precision cut gaskets to any shape, size and quantity. In sheets 1.2m x 1.0m. Thicknesses 3mm, 5mm, 6.4mm.