Lionpak 3200 banner

Lionpak® 3200

Tough, high performance aramid packing resistant to chemicals at high temperature and with WRAS approval.

TYPICAL APPLICATIONS
  • Potable water
  • Pumps
  • Valves

Lionpak 3200 is a tough, high performance packing, cross-plaited from texturised aramid yarns.

Each yarn is uniformly impregnated with PTFE dispersion and a silicone-based lubricant that resists chemical attack at high temperatures.

Lionpak 3200 is WRAS approved for use with hot and cold potable water at up to 85°C (185°F). A cost effective alternative without WRAS approval is also available, please download the Lionpak 3301 datasheet for full details and specification.

  • Suitable for a very wide range of media
  • Excellent abrasion resistance
  • Long service life with minimal shaft wear
  • Resilient and responsive in operation

  • Valves and pumps handling abrasive and aggressive media in pulp and paper mills, petrochemical plants, power stations, metallurgical plants, sewage works and china clay works
  • Also suitable for potable water, medium pressure steam, and hardening fluids such as tar and bitumen

Valve Stem Duties

  • Maximum operating temperature: +250°C (+482°F)
  • Minimum operating temperature: -50°C (-58°F)
  • Maximum system pressure: 15 MPa/150 bar (2175 psi)

Centrifugal Pumps and Rotary Equipment

  • Maximum operating temperature: +250°C (+482°F)
  • Minimum operating temperature: -50°C (-58°F)
  • Maximum system pressure: 2.5 MPa/25 bar (363 psi)
  • Maximum shaft speed: 20 m/s (3937 fpm)
  • Please contact us for further information on higher speed duties.

Reciprocating Pumps and Rams

  • Maximum operating temperature: +250°C (+482°F)
  • Minimum operating temperature: -50°C (-58°F)
  • Maximum system pressure: 15 MPa/150 bar (2175 psi)
  • Maximum rod speed: 1.5 m/s (295 fpm)

Compatible with media in the range pH 2-13, including water, oils, solvents, medium strength acids and alkalis.

  • All popular square sections from 3 mm (1/8") to 25 mm (1") in boxes containing 8 m (26' 3") in coil form or on spools as detailed in the product datasheet
  • Also supplied as split preformed rings and sets
  • Please refer to the product datasheet for spool ordering information
Related Downloads

Compression packing fitting guide

English pdf (502 KB) Download

Lionpak 3200 datasheet

English pdf (554 KB) Download

Lionpak 3301 datasheet

English pdf (434 KB) Download
Download

Compression packing guide

Our constant advances in materials and lubricants, product design and manufacturing techniques, keep us at the forefront of compression packing technology. We therefore bring you one of the widest ranges of packings to match the temperatures, pressures and speeds of your most modern fluid handling systems, and economical packings for your older plant.

Find out more
Compression packing guide

Expert to Expert

Want to discuss your project, engineering or materials challenge expert to expert? Simply provide us with your contact details and a little information about the application you are working on, and one of our experts will contact you as soon as possible.

Get in touch