You are currently viewing the James Walker Global website.

Close
Lionpak 9602 banner

Lionpak® 9602

A mineral fibre packing for high temperature static and dynamic sealing duties.

TYPICAL APPLICATIONS
  • High temperature
  • Static sealing
  • Valves

Lionpak 9602 comprises an interlocked braid of fibrous form, inorganic refractory oxides - silica fibre with no metallic or ceramic content.

It is impregnated with anti-frictional graphite flake and James Walker’s proprietary, high temperature, graphite-based dispersion. It also incorporates a metal corrosion inhibitor.

  • Suitable for many high temperature duties
  • Resistant to wear and abrasion
  • Corrosion inhibitor safeguards metallic interfaces from galvanic corrosion
  • Resistant to high temperatures

  • Recommended for hydro-testing of heat exchangers; also for general duties with furnace and oven doors
  • Suitable for duties with superheated steam and saturated steam, water, dyes, chemicals, non-oxidising liquids and gases
  • This product is also suitable for use on valves and centrifugal pumps

Valve Stem Duties

  • Maximum operating temperature: +550°C (+1022°F)
  • Minimum operating temperature: -50°C (-58°F)
  • Maximum system pressure: 8 MPa/80 bar (1160 psi)

Centrifugal Pumps and Rotary Equipment

  • Maximum operating temperature: +550°C (+1022°F)
  • Minimum operating temperature: -50°C (-58°F)
  • Maximum system pressure: 2 MPa/20 bar (290 psi)
  • Maximum shaft speed: 10 m/s (1969 fpm)

Static Duties

  • Maximum operating temperature: +550°C (+1022°F)
  • Minimum operating temperature: -50°C (-58°F)
  • Maximum static pressure dependent on application, please contact us for further details

Compatible with media in the range pH 0-14.

  • All popular square sections from 3 mm (1/8") to 50 mm (2") in boxes containing 8 m (26' 3"), in coil form or on spools as detailed in the product datasheet
  • Also supplied as split preformed rings and sets
  • Please refer to the product datasheet for spool ordering information

  • Average diameter of the mineral fibre used is over 6 μm (236 μin), which is considered non-hazardous to health. No protection for breathing, eye, hand or body is required by the World Health Organisation or European Union for the material’s normal handling, storage or use.
  • For further details please contact us to request a copy of our Safety Data Sheet (SDS)
  • Note that normal ceramic fibres, as often used in the manufacture of very high temperature compression packings, are around 3 μm (118 μin) in diameter. These much finer fibres are considered hazardous to health, with WHO and EU restrictions applied to the products that contain them.
Related Downloads

Static lid sealing fitting guide

English pdf (1 MB) Download

Lionpak 9602 datasheet

English pdf (579 KB) Download
Download

Compression packing guide

Our constant advances in materials and lubricants, product design and manufacturing techniques, keep us at the forefront of compression packing technology. We therefore bring you one of the widest ranges of packings to match the temperatures, pressures and speeds of your most modern fluid handling systems, and economical packings for your older plant.

Find out more
Compression packing guide

Expert to Expert

Want to discuss your project, engineering or materials challenge expert to expert? Simply provide us with your contact details and a little information about the application you are working on, and one of our experts will contact you as soon as possible.

Contact us