You are currently viewing the James Walker Global website.

Solosele sw banner

Solosele® SW

Designed primarily for medium to heavy‑duty applications.

  • Double-acting pistons
  • Hydraulic sealing

Solosele SW is well proven on double-acting split pistons where larger clearances must be accommodated.

The robust and durable construction of Solosele SW is based on a solid nitrile (NBR) elastomer core that incorporates synthetic-rubber proofed cotton fabric elements on either side, plus thermoplastic bearings. The hard rubberised fabric acts as an anti-extrusion element whilst also reducing wear.

The L-section wear / bearing rings of thermoplastic are located at each end of the seal. These support the piston and prevent it making contact with the cylinder bore under side loads, obviating the need for bearing strips. They also reduce extrusion damage.

  • Robust double-acting seal for use on split-type piston heads
  • Recommended for medium-to-heavy duty applications
  • Fully moulded sealing element with integral anti-extrusion elements to reduce seal wear and extend working life
  • Rigid thermoplastic wear/bearing rings allow for larger clearances, and prolong seal life under side loads
  • Eliminates the need for bearing strips, thus reducing housing sizes

Split piston heads in double-acting hydraulic applications of medium- to heavy-duty. The compact design of this seal recommends it for applications where space is at at premium, especially under side loads and where clearances are large.

  • Temperature range (standard materials): -20°C to +100°C (-4°F to +212°F)
  • Temperature limits (special materials): down to -45°C (-49°F) with low nitrile (NBR), or up to +200°C (+392°F) with fluorocarbon (FKM)
  • Maximum surface speed: 0.5 m/s (98.4 fpm). Please contact us for use at higher speeds.

Elastomeric core

  • Standard material: medium nitrile (NBR)
  • Special materials: low nitrile (NBR), or fluorocarbon (FKM)

Anti-extrusion elements

  • Standard material: cotton fabric proofed with a blend of synthetic rubbers
  • Special materials: cotton fabric proofed with a blend of synthetic rubber for use with low nitrile (NBR). Fabric proofed with fluorocarbon (FKM) for use with seal core of fluorocarbon (FKM).

Wear/bearing rings

  • Standard material: thermoplastic

Standard materials

  • Suitable for use with most mineral-based hydraulic fluids and most fire-resistant fluids of the water/oil emulsion or water/glycol types at temperatures up to 100°C (212°F). They also resist air, water and most lubricating oils and greases.

Special materials

  • Considerably extend the range of applications in terms of temperature and fluid compatibility. Please contact us for advice.

  • Readily available in standard materials to fit popular housing sizes. In addition, we hold a substantial library of mould tools for non-standard metric and inch sizes in our standard materials. Seals of non-standard sizes - or in special materials - are manufactured to order, but tooling charges may be incurred.
  • Fitting instructions are supplied with every seal.
Related Downloads

Solosele SW fitting guide

English pdf (141 KB) Download

Solosele SW datasheet

English pdf (229 KB) Download

Expert to Expert

Want to discuss your project, engineering or materials challenge expert to expert? Simply provide us with your contact details and a little information about the application you are working on, and one of our experts will contact you as soon as possible.

Contact us